
Tell us about your project and a Koenig Ventrac specialist will follow up.









The Ventrac __RV602 VACUUM COLLECTION SYSTEM*__ is for grass and leaf collection, and it consists of three primary components: 1. The **Bin Assembly** - mounts to the rear of 4000 series tractors. 2. The **Suction/Blower System** - powered by a 10HP Vanguard engine with electric start for efficient pickup and superior performance 3. **High Lift Mechanism** - hydraulically raise the collection bin up to five feet and dump to unload the contents into a garbage bin or trailer. The vac requires a docking station when dismounted. A storage stand with caster wheels is used when it is to be parked or moved around on a level floor. When loaded onto truck, a rigid base assembly is anchored to the floor that holds the vac firmly for transport. ##### Other Features include: * All steel construction * Hydraulic lift and dump * Electric start engine * Collection boot is quickly and easily attached to the mower deck * Handle on hose and hose end for ease of vacuuming flower beds, etc. * Hose clamp for attaching hose to collection boot is an over-center clamp for ease of connecting * Storage stands, complete with caster wheels, for ease of attaching or storage _*For optimal performance, use with a 60" deck. Not available for sale in California_
| Post Mower Dimensions | |
| General | |
| Lifiting Time | 5 seconds |
| Lift Capacity | 300lb136.1kg |
| Lifting Height | 5ft1.524m |
| Max. Capacity | 16ft³0.4531m³ |
| Width with Tractor | 66in167.6cm |
| Length with Tractor no mower | 104in264.2cm |
| Recommended capacity (for best resul | 13ft³0.3681m³ |
| Lowering Time | 4secs |
| Impeller, Blades | 5blade |
| Engine | |
| Engine Manufacturer | B&S Vanguard |
| Horsepower | 10hp10hp |
| Fuel Type | Gas |
| Engine RPM | 3600 |
| Engine Type | Single Cylinder, Horizontal Shaft |
| Dimensions | |
| Length | 40in101.6cm |
| Overall Width | 65in165.1cm |
| Height | 53in134.6cm |
| Weight | 525lb238.1kg |
Starting MSRP is $9,810. Final pricing depends on configuration and current Ventrac programs, so request a quote from Koenig Equipment for the real number on the setup you want.
Koenig Equipment is an authorized Ventrac dealer with stores across Ohio and Indiana. You can see which store is closest on our locations page, or request a quote and we will route it to the store nearest you.
Yes. Koenig Equipment runs on-site demos, so you can watch the machine work on your own ground, on your own slopes and surfaces, before you commit. Request a demo and we will set it up.
Genuine Ventrac parts are searchable by part number on Koenig Marketplace, and our Ventrac Parts Finder filters them by your model. Service is handled by Koenig technicians at our stores across Ohio and Indiana.
Backed by Koenig Equipment across Ohio and Indiana — real people, real service, since 1904.
Keep it running with genuine parts, searchable on Koenig Marketplace.
See it work on your property and ask about financing — just request a demo.
Get pricing or see one in action. A Koenig Ventrac specialist across Ohio & Indiana will follow up.