Find a Location Request a Demo
Ventrac › Equipment › Ventrac Attachments › Ventrac EA600 AERA-Vator
Ventrac EA600 AERA-Vator at Koenig Equipment
EA600 AERA-VatorEA600 AERA-VatorEA600 AERA-VatorEA600 AERA-VatorEA600 AERA-VatorEA600 AERA-VatorEA600 AERA-VatorEA600 AERA-Vator
Attachment

Ventrac EA600 AERA-Vator

When turf compaction caused by foot or vehicle traffic, sporting events or other stresses is a problem, periodic aeration is necessary to keep the turf healthy. The AERA-vator is designed to stir and loosen the soil beneath the sod without destroying the turf. The EA600 creates a core hole without bringing a core plug to the surface, leaving the turf ready for use immediately after treatment. Nine holes are created each foot (97 holes per square meter) and hole size is regulated by drive speed-- the slower the drive speed, the larger the hole. The AERA-vator works best in dry un-irrigated ground leaving a core hole while fracturing the sub soil. The EA600 is built with Ventrac Mount System, allowing for easy attachment changes, and comes with a standard jack stand for easy mounting.

$8,340Starting MSRP
Request a QuoteRequest a Demo
Sold & serviced at Koenig stores across Ohio & Indiana.

Specifications

General
Opt. Seeder cap.2.5 ft³
Seeder Wt.102 lb
Vibration Depth2.75 in
Aeration Density8holes/f2
Tines0.5625 in - 3.5 in
Shaft Speed800Cycles Per Minute
Optimal Engine Speed3200 rpm
Dimensions
Length34 in
Overall Width66 in
Height22 in
Weight420 lb
Working Width60 in
Overall Height with Optional Seeder32 in
Overall Width with Optional Seeder67.5 in
Before you order

We’ll confirm the fit, not assume it

Ventrac’s catalogue does not carry verified fitment for every part, and a wrong bracket costs you a week. Give us the model and serial number from the frame plate — usually under or behind the seat — and the Koenig parts desk checks it against your machine before anything ships.

Check my fitHow to find your model number

Talk to the parts desk

Factory-trained Ventrac technicians at Koenig stores across Ohio and Indiana. We can identify a part from your model number and a description of the symptom.

Find your store

Common questions

How much does the Ventrac EA600 AERA-Vator cost?

Starting MSRP is $8,340. Final pricing depends on configuration and current Ventrac programs, so request a quote from Koenig Equipment for the real number on the setup you want.

Where can I buy the Ventrac EA600 AERA-Vator in Ohio or Indiana?

Koenig Equipment is an authorized Ventrac dealer with stores across Ohio and Indiana. You can see which store is closest on our locations page, or request a quote and we will route it to the store nearest you.

Can I see the Ventrac EA600 AERA-Vator before I buy it?

Yes. Koenig Equipment runs on-site demos, so you can watch the machine work on your own ground, on your own slopes and surfaces, before you commit. Request a demo and we will set it up.

Where do I get parts and service for my Ventrac?

Genuine Ventrac parts are searchable by part number on Koenig Marketplace, and our Ventrac Parts Finder filters them by your model. Service is handled by Koenig technicians at our stores across Ohio and Indiana.

Sold & serviced local

Backed by Koenig Equipment across Ohio and Indiana — real people, real service, since 1904.

Genuine Ventrac parts

Keep it running with genuine parts, searchable on Koenig Marketplace.

Demos & financing

See it work on your property and ask about financing — just request a demo.

Ready to put a Ventrac to work?

Get pricing or see one in action. A Koenig Ventrac specialist across Ohio & Indiana will follow up.

Request a QuoteRequest a Demo